Go Green!

Benefits Using Xtreme Fuel Treatment – Get it for Free

Xtreme Fuel Treatment can save you up to eighty cents a gallon every time you fill up your tank.  In Australia and United Kingdom drivers can triple the fuel savings because the price of gas is higher.  Syntek Global recently opened the market for consumers to buy the product globally or you can become  a factory rep.  Every time you fill up your tank it saves you more money in gasoline than it costs you to to buy the product.  Xtreme Fuel Treatment is an Eco-Friendly product lowering pollution and emissions while the lubricants protect your engine by burning off the carbon build up.  Your vehicle will run like it did when you first bought it resulting in more horsepower.

I drive a BMW and was told I needed to only buy premium gasoline.  I starting using a 1/4 ounce of treatment for every 20 gallons of fuel in my BMW when I filled up my tank.  After three months I started gaining between 100 to 120  more miles farther on every tank of gas.  Because of the OrganoMetallic catalyst and the other products in the treatment I don’t need to buy the higher octane fuel.  I buy regular gasoline instead of premium saving additional money at the pump.  My car drives smoother and has more horse power than it  did when I was buying 91 octane fuel.

Benefits:
1. Increases Fuel Mileage
2. Prolongs Engine Life & Reduces Engine Wear
3. Improves Vehicle Performance & Horsepower
4. Reduces Harmful Emissions & Pollutants between 33.5% – 90%

Americans on average keep their vehicles 9.2 years. Less than a year after later carbon builds up on their engine and their fuel lines get dirty then they begin to lose horsepower. Because the engine runs at a lower temperature while using XFT, you actually extend the life of the engine and have more horse power. You feel like you are driving a race car behind the wheel!

You also don’t need higher octane fuel. Premium gas means it is a higher refined gas however, high octane fuel is harder to ignite. Because our product has a burn rate modifier your engine can run at 400 degrees less while reducing friction on your engine while increasing fuel efficiency and performance.

Ingredients: 7 Components -Patented and cannot be duplicated because of the blending process

Remember, there is  NO ALCOHOL in this product so the seals & gaskets won’t dry out like every product on the market.  We use an OrganoMetallic catalyst so it is safe for your vehicle and for the environment.

Most everyone is concerned about Global Warming. This is a Green Product registered by the Environmental Protection Agency and it is 100% money back guaranteed. If you are concerned about reducing global warming and the air quality.  Protect the world from damage caused by emissions & pollutants.  Save money and order your product today.

The website has several videos which will help you understand why the time is NOW.  Thank you for taking the time to read this
article.

Give me $4 and I’ll give you $20 back!

Last summer when oil costs exceeded $130 a barrel it was predicted that gas prices would exceed $5.00 a gallon, and it did. May 2009 gas prices increased a whopping 13% in just one month. People including trucking companies are now finding an alternative to lower the cost of their fuel and repair and maintenance expenses, especially in this economy.

A proven product with over twenty years of history with impressive documentation to cut maintenance and repairs cutting fuel expense and lowering emissions. The financial savings is an unprecedented in the history of consumerism.

Truckers are saving up to $900.00 a month in fuel expense but what is more impressive is their engines are running smoother and they have cut their repairs in half. The cost of down time and engine components has doubled. When I did extensive research on the company and the product I had leaned that the product has over six patents and over twenty years of product history. So you are asking, so why haven’t you heard of Engine Boost 2.0 fuel treatment before. It was used industrially and sold in 55 gallon drums all over the world. Today you can buy quantities that are more affordable in containers  from 1/4 ounce to 1 gallon.

What is happening over the past nine months consumers are purchasing the product and using it in their hybrid vehicles, diesel engines, RV’s, boats, motorcycles, lawnmowers, and farmer’s are putting it in their holding tanks. What is really cool is it doesn’t matter if you fill up your gas tank once a week or every day you always save more money than you spend when you use Syntek Engine Boost 2.0 especially now that people are not buying new vehicles as often.  In fact, the average car owner has the car 9.2 years.   You will notice that new car sales are down and if you are using the engine boost you can prolong the life of your engine by 50%. If you want to see the science behind the product go to my website globalsytek.com and and click on  the the resource tab. There are many detail data on the products validity.

I had spoke to a truck driver about his gas savings Bo Robinson and his excitement was astounding. He had been using the product and told a few of his trucker buddies running construction companies so they tried the product. They noticed their equipment running smoother. They used it in their scrapers, dozers and their trucks. In Idaho, with the cold weather their equipment lags when they start up however, with Syntek Engine boost 2.0 the equipment starts up quickly and runs smoother from the other components in the product.

Listening to story after story about a product I could feel the excitement and see the genuineness of many people. It was impressive to say the least. I bought the product to see for myself and found driving my BMW is I didn’t have to use premium gasoline anymore. I bought 87 octane and was a little suspicious at first but now after 8 months on the product my car is running like a champ. I found that for every tank of gas I was saving $15.00 and the product cost me $3.00 per tank. That was less than the price of a cup of coffee  to save fifteen bucks. That was when gasoline was $2.50 a gallon. As fuel prices climb I save more. I’m one of those people that don’t complain about the fuel costs anymore!

On the green side of things I found this to be true. I save our natural resources because I don’t use as much gasoline. I also save on our environment by lowering emissions by over 33%. My farmers are lower emissions by 47% and let me ask you this question, isn’t it our responsibility to protect our planet? If we don’t, who is going to?

If you need proof that this product does what I am telling you go to the resource tab on my website and read the pdf files. You will also see the testimonials on GE Power Plant, Schmidt Oil Fields, Farmer’s, and even dynamometer test proving this product works.

Jump on the phone and give me a call and let me tell you about a professor with a Phd. from Brigham Young University tell you how he went from 13 mpg to 17 mpg pulling a small trailer behind his forty foot Econoline all the way to NY. Oh by the way, he teaches a class on how to retire with money. Do you think he has something to share with his class in a more practical way? for more information

Lower Maintenance Costs

15,000 HOURS ON THESE PISTONS—EXTENDED TO 25.000 HOURS

These pistons are from a large mining truck company in Indonesia, PT PAMA, which has 15,000 hours of use. Notice the absence of carbon deposits. If you eliminate carbon inside a motor, you will have a 5% increased fuel efficiency.

PT PAMA is a very large mining company in Indonesia. Syntek Engine Boost is used in all company owned HD 785-5 Engines. the normal maintenance cycle required prior to engine re-manufacturing occurred previously at 15,000 hours or at 900,000 miles.

The maintenance included replacing cylinder liners with new expensive liners. After years of using Syntek Engine Boost 2.0, the regular maintenance schedule was changed from 15,000 hours to 25,000 hours before the total reconstruction of the engine was required. Using Syntek Engine Boost 2.0 has kept the cylinder liners within almost nearly identical tolerances of new liners. Enclosed are inspection reports showing the measurements of a new liner and an older liner with 14,887 hours of run time. Tolerances are within “new” specifications. This, along with the cleanliness of the engine, has saved PT PAMA millions of dollars in maintenance expenses. (Click here for the Inspection Reports)

“Farmers Plant Food ran tests with Syntek fuel additive on our Cummis 6.0 diesel generator. This generator uses 5.06 gallons of diesel an hour. On the first test we added an 1/2 oz. of Syntek with 20 gallons of fuel. The generator used 4.4 gallons an hour on this first test. The second test we ran the same ratio of Syntek and had the same results. The generator used 4.4 gallons an hour, again. The third test we used 1/4 oz. of Syntek per 20 gallons and the results improved. The generator used 4.2 gallons per hour. The diesel consumption seems to improve with time.

We believe the testing that we ran is very accurate as there are no variables involved. The generator runs at the same rpm’s at all times, same electrical draw, no wind factors to be considered, no traveling up and down hills. Everything stays consistent when running this generator.”
-Thomas Zweep, Converter Operator – Farmers Plant Food, Inc.

Click here for a printable version of the Industrial Testimonials

Click here for a printable version of the Industrial Testimonials

Click here for a printable version of the Industrial Testimonials

Click here for a printable version of the Industrial Testimonials

Click here for a printable version of the Industrial Testimonials

Syntek is Trusted by Industry Leaders

BUY ENGINE BOOST 2.0 NOW

Possible Product Result Patterns & Why

Bio Diesel

Used by Many Universities

You can use Syntek Engine Boost with 20/80 Bio Diesel. This will help the performance and save on fuel after the product has cleaned the sludge and deposits off the the internal engine components. This is useful for universities and other education foundations who are already trying to find new ways to become economically sound and environmentally compliant.

Scientific Evidence This Works

This product has been used industrially and commercially for over fourteen years. There is mega third party scientific data to prove this claim. The largest mining company in the world, PT PAMA in Indonesia, has used the product for nine years. Let me ask you a question, If the product didn’t work do you think they would continue to buy it? Of course not. Go to the resource tab and read the documented evidence – and buy some today.

In fact, PT PAMA was breaking down their engines every 15,000 hours. After using Syntek they don’t even look at the equipment until it has reached 25,000 hours of engine time and many engines don’t get overhauled until after 30,000 hours.

To see more of the emissions and compelling scientific evidence, click here for our resources.

BUY ENGINE BOOST 2.0 NOW

Generators

Syntek History:

Syntek was developed for diesel back up generators.

When the telephone company would lose power the back up generators would come on, but would quickly go out. Due to the fact that the gas had sat for a long period of time along with condensation an issue, the generator would stall and seize. The past 14 years Syntek has marketed and sold the Engine Boost exclusively to large industrial applications around the world. The product was sold to mining companies, electrical generating plants, bus companies, trucking and excavating companies, etc. As of 2008 Syntek has marketed and distributed to smaller business.

Compare Syntek With Other Products
Boats, RV, Motorcycle, Farm Equipment, Diesel Engines

Compare Syntek With Other Products

Boats, RV, Motorcycle, Farm Equipment, Diesel Engines

What makes our product different?
Concentration of product and other ingredients.
$60.00 VS. ¼ OZ. $3.50

BUY ENGINE BOOST 2.0 NOW

Think about this. If you wanted to build a business but didn’t own your own truck how could you benefit by buying the product? You could use it in the truck that you are driving and document your results. Then find out how much money you are saving the company by using the product. On an average investment of $280.00, you will save $874.00 on fuel expenses. Now you collect your $100 – $250.00 bonus the company gives you for keeping the mileage down and you just introduced the product to your company. You almost paid for the expense of the product and have a good chance of landing the company you work for on the product. If you go get two trucking companies and share with them how much money you saved your company you will become a very RICH man. Call me and I will explain this further. Bobbie Smith San Diego, CA 858-622-0062

In the meantime, tell your trucker friends and create residual income that continues to increase every month. Answer one question. How would you feel if every month your business grew and then one day, you made more in a month than you did as a truck driver all year? Now you get the picture? You get to retire and do what you want with no more financial worries.

So who do you know that would like to save money when they drive their rig? Lets say it like this, who do you know that might know someone who might buy a lot of fuel who would like to save money? Did you know truckers are beginning to retire on their connections alone?

BUY ENGINE BOOST 2.0 NOW

There are no drying agents in Syntek such as lacquer or alcohol which is used as a combustion catalyst in other products. Alcohol will dry out your seals and gaskets. However, you won’t find alcohol or any known drying agent in Syntek. If you are wondering how to know whether or not the product you are using contains alcohol, remember one fact. With Syntek you will only use 1/4oz of product in 20 gallons of gas. Other products take between 5oz and 16oz each time you fill up and, not only will it cost you more money, you will also be adding known harmful fillers into your engine.

I’ll use an analogy to explain the difference. You can buy a bottle of spray bleach cleaner for $5.00 or you can pour a 1/4 ounce of bleach in water to do the same job.

While using Syntek you are prolonging your engine life, reducing emissions, increasing your gas mileage and you increase your horse power.

Syntek is 100% guaranteed or your money back! It doesn’t cost you anything because Syntek saves you more than you spend.

Order your bottle today! Tell your friends and get your product for free.

Benefits for Commuters – Regular & Premium Gasoline

If I could show you a way to save you sixty cents a gallon every time you bought gasoline, would you want to know about it or would you like me to keep it a secret?

Syntek gas treatment saves you money with every fill up and it also increases your engine life by 50%, giving you 10% more horse power and reducing your emissions by 33.5%.

On an average consumers are driving 4 miles extra per gallon. Ron Leak drove his van from Orange County, CA to Grants Pass, Oregon and got an extra 8 miles a gallon saving $30.00 every time he filled up his tank. What if you could drive for FREE for the rest of your life? Find out why this is the most superior product on the market.

BUY ENGINE BOOST 2.0 NOW

The Solution: Engine Boost 2.0

There is mass market appeal because everyone wants to save money especially in this economy. There is verifiable benefits and proven documented results that this product works with every use. In the beginning there may be different results depending on your vehicle.

• No Alcohol
• EPA Registered
• Use Lower Octane Gas With No Pings.
• No Warrantee Issues
• Lower Maintenance Costs
• More Horsepower
• 2.5 Product and 15ppm Fuel
• Anti-Gel

Click here to purchase Syntek Engine Boost 2.0

Diesel Engines, Bio Diesel & Generators

From his words…

“Hi my name is Bo Robinson and I have been a truck driver for 10 years. If you want to get 200 to 330 miles more on a tank of fuel then buy the product. I retired after sharing this product with my trucker friends. Remember the product is 100% guaranteed or your money back so you have nothing to lose. Stop wasting precious fuel and do your part in protecting our environment and begin saving money today and every day.”

Owner operator’s love saving money and found a way to save on their fuel expense. On an average owners are buying and running through 2,560 gallons of fuel consumption a month driving roughly 15,000 miles.

Syntek Engine Boost  2.5 can cost them as little as 11 cents a gallon depending on how  it is being purchased.  If they buy two 16 oz. bottles a month and pay $320.00 a month for the product, they will have saved $854.00 or a net profit of $534.70 each month, or an annual savings of $6,416.40.

That is the savings if diesel prices are at $2.50 per gallon and as fuel prices begin to rise the savings will also increase.

BUY ENGINE BOOST 2.0 NOW

Before Syntek Engine Boost, Bo Robinson  was getting 5.3 miles per gallon- and after  using Syntek he got 6.4 mpg.  At first you think that isn’t much of a savings but when you calculate it you realize  the savings are substantial. You are saving on an average 15% on your fuel costs and 50% on repairs and maintenance cost. You become compliant because your emissions are cut by 33.5%.

The Math

• One long haul truck 12,000 miles a month 5 miles per gallon baseline
• After using Engine Boost 2.0 mileage increases to 5.8 miles per gallonWithout Engine Boost 2.0
  2400 gallons of fuel x (current price) = monthly fuel cost

  With Engine Boost 2.0
  2069 gallons of fuel x (current price) = monthly fuel cost

• Gross savings 331 gallons of fuel x (current price)
• Less cost of Engine Boost 2.0 is approximately $280
• Net monthly savings on fuel alone. This does not factor in reduced maintenance cost, reduced emissions, or any other benefits

“I was hauling 66,000 pounds and got 6.4 miles per gallon with a heavy load.“ -Bo Robinson

That was amazing in itself and then Bo sold his rig because he is making more money sharing Syntek Engine Boost  than when he was driving his rig.  Now, Bo can be home with his wife, spending his time enjoying what he wants to do.

BUY ENGINE BOOST 2.0 NOW

The Solution: Engine Boost 2.0

There is a mass market appeal because in tough times every penny counts. With scientific third party documented results proven for over a 14 year period companies like PT PAMA, GE Power Systems,  Schmid Oil Field Services, Marine, and then Racer’s, Trucker’s and Farmer’s experiences give you plenty of reasons to buy the product.

“I am writing this letter to you to inform you of the great response from our employees about the usage of Engine Boost 2.0 Fuel Treatment. We started using the fuel treatment in the winter and have had great luck in our equipment starting as well as our fuel savings. We have started to notice that our run time on our equipment is longer. Instead of fueling every 6 hours on our Dozers and Scrapers, we are refueling every 8 to 10 hours. Our exhaust stacks are running cleaner and the smoke coming from the equipment is turning into a greyish almost white smoke. We decided to do a test on savings on our fuel consumption between the trucking side and construction side of our company. The test results were shocking, doing the same amount of work load if not more, we purchased 15% less fuel than the previous months. Our trucks were topping the “THREE SISTERS” hills on I-80 with 2 more gears then before and the trucks went from 5.6 miles per gallon to 7.2 miles per gallon after just one month. We hope we can buy this product in bigger volumes then 16 oz. bottles because we plan on treating our storage tanks which are 10,000 gallons every time we fuel up. Thanks for taking the time for your testing of Engine Boost 2.0 and we look forward to a long term relationship between both our companies.”
-Bill – Service Technician

After purchasing my Peterbilt 379, with a 550 hp. Cat., I was disappointed   in the fuel mileage, averaging 4.7 mpg.  At about 30,000 miles, I received a   Sample of Syntek Engine Boost 2.0. Since using the product, my milage has   increased to 5.7 up to 6.2 mpg, and being an owner-operator, the rising cost   of fuel eats into the profit.  This product is saving me $$ everyday.
Thank you,
Chuck  Jacksonville, FL

Go to the resources, read additional test results from these companies and then start your business today or simply buy the product as a preferred customer.

• No Alcohol
• EPA Registered
• Use Lower Octane Gas With No Pings.
• No Warrantee Issues
• Lower Maintenance Costs
• More Horsepower
• 2.5 Product and 15ppm Fuel
• Anti-Gel

Click here to purchase Syntek Engine Boost 2.0

BUY ENGINE BOOST 2.0 NOW

Remember I told you there were many reasons why truckers love this product? They spend on average $22,000 for a brand new Cat engine.

Replacing not only the engine but also the truck is costing them $130,000 thousand dollars. Now that is an expensive home on wheels. They are reducing their costs across the board.

• No alcohol or lacquer which are used as a combustion catalysts but have harmful side effects
• Reduces high octane usage
• Combustion Catalyst (why you get the gas savings)
• Detergents (removes deposit build up on fuel pumps, injectors and the fuel system)
• Lubricants (lubrication to pistons, fuel pumps and injectors reducing friction and prolonging the working life of the engine)
• Fuel Stabilizers (prolongs the life of stored fuel; ideal for seldom used equipment)
• Polymerization Retardant & Dispersants (reduces sludge buildup in fuel which can plug filters)
• Rust and Corrosion Inhibitors ( prevents tank and fuel system corrosion caused by oxidation and condensation)

Syntek Global boasts of increasing the life of your engine by 50%.

The formulation has 5 patents and protect your engine from costly repairs.  This is the biggest long term advantage for using Global Syntek Engine Boost with the exception of lowering emissions by 33.5%.

Notice the red dots in the picture below. The left engine has only a few red dots, while the right has many.

These dots signify the fuel being injected into the motor. The more dots, or droplets, indicate the increased fuel that is being burned instead of turning into carbon. Carbon is really about wasted gas not used and you can notice this by the amount of exhaust coming out your tail pipe.

You can also think of this as lost money  up the smoke stack.  When you can eliminate carbon inside your engine that alone will create a 5%- increase in fuel efficiency.  Now your engine is burning more of the fuel and increasing your gas mileage.

Another benefit is Organic-Metallic burn rate modifier significantly reduces the burn temperature of both gasoline and diesel engines. For example, untreated diesel fuel burns at approximately 1200 degrees F.  When treated with Syntek Engine Boost the burn temperature reduces approximately 400 degrees F to 800 degrees F. This means it increases the higher percentage the fuel ignites and burns instead of being wasted.

Fuel Injectors. Clogged on the left. Unclogged by Syntek on the right.

Four things happen:
1. It reduces emissions by 33.5%
2. Increased horse power by 10%
3. Increased life of engine by 50%
4. Increased fuel efficiency 8%-29%

BUY ENGINE BOOST 2.0 NOW

How Engine Boost 2.0 Works

Carbon is a fuel efficiency killer. If you have ever taken off or looked at the head of a motor you will see a lot of carbon buildup, it looks like soot. Its on the inside of your engine all over your heads, valves, and the pistons. Carbon buildup destroys fuel efficiency.

When you use Syntek engine boost you begin to burn the carbon build up. You will also eliminate the carbon from building up because it allows for a complete burn.

• Reduces the temperature at which combustion occurs (in a diesel engine from 1200°F to 800°F)
• Accelerates the rate at which the combustion occurs.
• Reduction in the fuel droplet size that is injected into the combustion chamber, thereby increasing the surface area available to the combustion process.
• The combined result is a much more complete burn generating more power, and/or requiring less fuel to generate the same power per pound of fuel consumed.
• Increases the burn of the available BTU’s of fuels

BUY ENGINE BOOST 2.0 NOW

Notice how the left picture has a few red dots which signifies fuel being injected into the motor. Notice that the right picture has many more dots. The more dots or droplets the better or increase that the fuel is being burned instead of it turning into carbon. Carbon is really about wasted gas not used. You can notice this in your exhaust pipe or you can picture this as lost money down the pipe. When you can eliminate carbon inside of your motor that alone will create a 5 percent more fuel efficiency. Now your engine is burning more of the fuel increasing your gas mileage.

Technical Information
These pistons are from a large mining truck company in Indonesia which has 15,000 hours of use. Notice the absence of carbon deposits. If you can eliminate carbon inside a motor that alone will create a 5 percent more fuel efficiency. So the droplet size of the fuel and the elimination of carbon will create more fuel efficiency.

Another benefit is Organic-Metallic burn rate modifier significantly reduces the burn temperature of both gasoline and diesel engines. For example, untreated diesel fuel burns at approximately 1200 degrees F. When treated with Syntek Engine Boost 2.0 the burn temperature reduces approximately 400 degrees F to 800 degrees F. This means it increases the higher percentage the fuel ignites and burns instead of being wasted.

Three things happen: It reduces emissions on diesel engines and gasoline engines, increases horsepower up to 10% or more and increases fuel economy from 8%-29% and increases the life of your engine up to 50%.

Compare Syntek With Other Products
Boats, RV, Motorcycle, Farm Equipment, Diesel Engines

BUY ENGINE BOOST 2.0 NOW

“In 2008 I was introduced to Syntek Engine Boost 2.0. After meeting with the owners of the company I realized that if what they were telling me about the product was true, this would be the biggest business opportunity of my life. Not willing to just trust their testing, I had to do my own. For the next five weeks I conducted thousands of miles of testing over the same 75.9 miles between Bountiful, UT and Logan, UT. Without the product, driving this stretch of freeway my fuel economy was 26.215 mpg in my 2004 Mercury Sable. With the product my fuel efficiency average was 30.59 mpg or 16.7% improvement. I’m in!”
John Chadwick – Logan, UT

“I am writing this letter to you to inform you of the great response from our employees about the usage of Engine Boost 2.0 Fuel Treatment. We started using the fuel treatment in the winter and have had great luck in our equipment starting as well as our fuel savings. We have started to notice that our run time on our equipment is longer. Instead of fueling every 6 hours on our Dozers and Scrapers, we are refueling every 8 to 10 hours. Our exhaust stacks are running cleaner and the smoke coming from the equipment is turning into a greyish almost white smoke. We decided to do a test on savings on our fuel consumption between the trucking side and construction side of our company. The test results were shocking, doing the same amount of work load if not more, we purchased 15% less fuel than the previous months. Our trucks were topping the “THREE SISTERS” hills on I-80 with 2 more gears then before and the trucks went from 5.6 miles per gallon to 7.2 miles per gallon after just one monthWe hope we can buy this product in bigger volumes then 16 oz. bottles because weplan on treating our storage tanks which are 10,000 gallon every time we fuel up.Thanks for taking the time for your testing of Engine Boost 2.0 and we look forward to a long term relationship between both our companies.”
Bill – Service Technician

BUY ENGINE BOOST 2.0 NOW

Additional Benefits

The product has detergents in it that keeps your internal engine parts clean from dirt and keeps your gas tank from rusting and has a corrosion inhibitor. One of the components is a fuel stabilizer which prolongs the life of the fuel, so a lawnmower or a recreational vehicle will start up promptly after they have sat for the winter. Engines create condensation in both warmer and colder climates, and water seeps into your engine. However, the demulsifier will keep this from happening. Condensation is what causes so many engine repairs and replacements.

It also reduces high octane fuel requirements. That means if you are driving a car which needs premium gasoline you can now use 87 octane gasoline. You will actually get better horsepower using Syntek with regular gas than you will using expensive premium grade gasoline. You will be surprised by the increased horsepower, and this is why racers are using the product!

The lubricants which is great for pumps, injectors, or engines will extend the life of your engine up to 50%. This is the biggest reason for using Syntek. This is why this product has been used globally and commercially for over 15 years. Companies continue to use Syntek because it has saved them millions of dollars in fuel & repair bills.

In many products, alcohol and lacquer are key ingredients, which are often used as combustion catalysts. However, they are known to cause harm in the seals and gaskets of your engine. You won’t find alcohol or any known drying agent in Syntek which makes it the only product on the market that will not harm your engine. If you are questioning this remember one fact. In Syntek you only use 1/4 ounce in 20 gallons of gas. With other products you are using between 5 to 16 ounces each time you fill up your gas tank.

I’ll use an analogy to explain the difference. You can buy a bottle of spray bleach cleaner for $5.00 or you can pour a 1/4 ounce of bleach to do a better job at a fraction of the cost.

When using Syntek you are prolonging your engine life, reducing emissions, increasing your gas mileage and you increase your horse power. Having driven a high performance car having more horse power is even more enjoyable when driving through the canyons or on the open road.

Syntek is 100% guaranteed or your money back. It doesn’t cost you anything to use it. In fact, you make money just by using it because you always save more than you spend.

Remember, Syntek reduces emissions by 33.5%, so you are not only saving money, but you are also saving your planet. If you go to the resources tab at the top of this website, you will see a study on a Toyota Corolla going from 25.6 miles per gallon to 37 miles per gallon, after only 10 applications of Syntek.

Order your bottle today!

BUY ENGINE BOOST 2.0 NOW

Next Page »